Masking and prep
Windows and trim taped off before any coating goes on.

DAYTON PAINTING SERVICES
Refresh Your Home's Appearance Without Replacing Your Siding
Recent work
Windows and trim taped off before any coating goes on.
Trim gets its own coat, applied from a lift for full, even coverage.
A refreshed exterior — the result of prep done right.
What's included
Yes, in most cases — with honest qualifications. Proper preparation is critical, high-quality exterior coatings are required, and the siding has to be in sound condition. Painting will not fix damaged siding — it covers it. We paint vinyl and aluminum siding throughout Dayton, Kettering, Centerville and Beavercreek.
The honest recommendation
We install and replace siding as well as paint it, so this isn't driven by which job we'd rather have. Painting won't fix damaged siding — it covers it.
Not sure which side you're on? See our vinyl siding replacement or our siding repair services — a free assessment will tell you which one actually applies.
Before you call
Why paint fails on siding
Three of the four things that decide whether a finish lasts happen before any paint is opened. Select each to see what goes wrong.
Chalky oxidation left in place. A powdery layer sits between the panel and the coating — paint bonds to dust, not to siding. Verdict: fails.
Surface not fully dry. Moisture trapped beneath the film blisters outward as it tries to escape. Verdict: fails.
Wrong product for the substrate. The coating cracks and lifts at the edges under normal thermal movement. Verdict: fails.
Cleaned, dry, correct product. The coating bonds directly to sound siding — continuous and intact. Verdict: holds.
The one most people miss
Aluminum and older vinyl develop a fine chalky layer as the surface weathers. Run a hand down the wall and it comes away dusty — that dust is oxidation.
Paint applied over it doesn't bond to the siding. It bonds to the powder, and the powder is already letting go.
Removing it is the single biggest difference between a finish that lasts and one that peels within a couple of seasons. It's also completely invisible in a finished job, which is why it gets skipped.
How we work
Colour
Manufacturer colour limitations, heat absorption, dark colours on vinyl, HOA considerations, neighbourhood aesthetics, and long-term maintenance all factor into the choice.
The honest constraint: vinyl expands and contracts with temperature, and a much darker colour than the original absorbs more heat. Coatings formulated for vinyl exist for exactly this reason, but there are limits — a contractor who says any colour is fine on any vinyl isn't being straight with you.
Manufacturer warranty terms around painting vary by brand. It's worth checking the specific warranty on your siding before choosing a colour.
Local conditions
Southwest Ohio moves siding through a full range of thermal expansion every year, and a coating has to move with it. It also narrows the window when application conditions are right — surface temperature and dew point matter as much as the forecast, which is why we schedule around weather rather than through it. We use premium exterior coating systems from Sherwin-Williams and Benjamin Moore.
Why AlphaOne
See financing options or read about our workmanship warranty.
Schedule Free Siding Assessment →Yes. Vinyl siding can be painted successfully when the surface is properly cleaned, fully dry, and coated with a paint product formulated for vinyl. The siding also needs to be in sound condition — painting won’t fix damage, only cover it.
It depends on the manufacturer. Warranty terms around painting vary by brand, so it’s worth checking the specific warranty on your siding before you commit to a colour or a coating system.
It depends on prep, the coating system used, and how thoroughly the surface was cleaned and dried before painting. Oxidation removal is one of the biggest factors — we can walk through what to expect for your siding during a free assessment.
Yes — aluminum siding is a good candidate for painting once any oxidation is removed and the surface is properly prepped. It’s often a more cost-effective way to freshen faded aluminum than replacing it.
It can, if the surface wasn’t properly cleaned and dried, or if the wrong product was used. Painting over oxidation or trapped moisture is the most common reason a finish fails early — prep matters more than the paint itself.
Oxidation is a fine, chalky layer that develops on aluminum and older vinyl as the surface weathers. Paint applied over it bonds to the powder, not the siding, so it lets go early. Removing it before painting is one of the biggest factors in how long a finish lasts.
We use premium exterior coating systems from Sherwin-Williams and Benjamin Moore, matched to the substrate — vinyl and aluminum each call for different formulations.
In many cases, yes — but vinyl expands and contracts with temperature, and a much darker colour than the original absorbs more heat than vinyl was designed for. Coatings formulated for this exist, but there are limits, and we’ll tell you honestly if a colour you’re considering isn’t a good fit.
Usually, yes — painting is typically the smaller job. But cost isn’t the only factor: if your siding is damaged, warped, or near the end of its life, painting only delays a replacement you’ll need anyway. We’ll give you an honest recommendation either way.
It can be, but it shouldn’t be. Paint covers damage — it doesn’t fix it. If your siding is cracked, warped, or pulling away, we’ll recommend repair or replacement instead of painting over the problem.
We handle minor repairs — small cracks, loose panels, and similar issues — as part of the painting process. More extensive damage typically points toward repair or replacement instead, and we’ll tell you which one applies.
Cost depends on the size of your home, the condition of the existing siding, and the coating system used. A free assessment gives you a clear written estimate specific to your project.
It depends on the coating system, sun exposure, and how the surface was prepped originally. We can talk through what to expect for your home during a free assessment.
Yes. Pressure washing and oxidation removal are part of our standard prep process before any coating is applied.
A free assessment, an honest recommendation either way, and a clear written estimate.
Schedule Free Siding Assessment →AlphaOne Exteriors · Dayton, Ohio · VSI Certified · Since 2012